Norsepower installs first tiltable Rotor Sails on Sea-Cargo Ro-Ro

 

Photo credit: Sea-Cargo

Norsepower Oy Ltd., the leading global provider of auxiliary wind propulsion systems, has successfully installed two 35m tall Rotor Sails for SEA-CARGO, a leading logistics provider in the North Sea market. This installation heralds the world’s first tiltable Rotor Sail, showcasing that vessels that have to negotiate height restricted routes can benefit from this fuel and emissions-saving solution.

According the analysis conducted by Norsepower and SEA-CARGO, the installation - on board the SC Connector, a 12,251 gross tonne (GT) sidedoor Ro-Ro – can achieve a fuel consumption, fuel cost and carbon emissions reduction of up to 25%. In good wind conditions, the sailing vessel will maintain regular service speed by sail alone.

As shipping transitions towards decarbonisation and meeting IMO’s targets of 2030 and 2050, the maritime transport industry is looking for proven solutions to ensure emissions reductions. Harnessing wind is a natural step to reducing emissions and fuel consumption. Norsepower’s Rotor Sail Solution is a modernised version of the Flettner rotor, a spinning cylinder that uses the Magnus effect to harness wind power to thrust a ship.

SC Connector, which sails between Western Norway, Denmark, the Netherlands and, also, Sweden and Poland, transits under multiple bridges and powerlines, requiring adaptation of the Rotor Sails to tilt to almost horizontal when required.

Tuomas Riski, CEO, Norsepower, said: “Completing the installation has been extremely rewarding, as it reflects how, in taking a collaborative approach with a customer, we can innovate to create solutions that allow Rotor Sails to benefit almost any vessel type or trading route. As we get closer to 2030 IMO targets, we are seeing our technology gaining momentum – with the market seeing the flexibility we can provide to suit different vessel requirements. This installation demonstrates the technology can go a long way to future proofing IMO GHG compliance, while ensuring significant emissions, and fuel reductions to a variety of vessel profiles today.”

Ole Sævild, Managing Director, SEA-CARGO, added: “We are focussing on utilising available renewable energy and using it for direct propulsion to design more environmentally friendly vessels. The Rotor Sail technology has been proven in the market for a while, but the size is unique for our project. The sails are far more efficient than conventional sails of same size and the tilting function is essential to our voyage routes. Given the estimated emissions savings, we will use our experience of this full scale project, and proceed to develop it further for other vessels in our fleet.”

The Norsepower Rotor Sail Solution is the first third-party verified and commercially operational auxiliary wind propulsion technology for the global maritime industry. The solution is fully automated and detects whenever the wind is strong enough to deliver fuel and emission savings, at which point the Rotor Sails start automatically.

Popular posts from this blog

The Swedish Accident Investigation Board wants to investigate Estonia's hull

Image
    Photo:  The Swedish Accident Investigation Authorit y The Swedish Accident Investigation Authority says it wants to analyse the hull of the sunken passenger ferry Estonia to assess the newly discovered hole discovered by a documentary film crew earlier this autumn. It wants to examine the metal material of the ferry and the conditions of the Baltic Sea bed where it rests. Jonas Bäckstrand at the investigation authority does not exclude sending a team of divers down. The work with the preliminary assessment is led by Estonia. The passenger ship ESTONIA sank on 28 September 1994 during a voyage from Tallinn to Stockholm. Of the 989 people on board, 852 died. In accordance with an agreement between the prime ministers of Estonia, Finland and Sweden, a joint accident investigation commission was formed to investigate the accident. A final report was published in December 1997. On 28 September 2020, film material was published that showed a hole in the starboard side...
Read more

ABB to power South Korea’s first domestic zero-emissions ferry

Image
    ABB has secured a contract with Haemin Heavy Industries shipyard to provide a complete power and propulsion solution for Busan Port Authority’s first all-electric passenger ferry The new ferry represents the first commitment by South Korean authorities to a plan which will see 140 state-owned conventionally powered vessels replaced with those operating on cleaner alternatives by 2030, in line with environmental legislation. Sustainable transportation, including marine vessels, will play an important role in South Korea’s plan to achieve net-zero emissions by 2050, set out in the country’s Green New Deal, announced in 2020. As the first system integrator chosen to support this initiative, ABB will deliver an end-to-end electric power and propulsion solution for the twin-hulled ferry, which is due for delivery in 2022. The 40-meter catamaran ferry will have the capacity to carry up to 100 passengers and five crewmembers and will ...
Read more

Stena Line reveals the names of the new Baltic Sea vessels

Image
    Photographer:   Stena Line Ferry company Stena Line has announced the new names of the two modern ferries that are due to start operating on the route between Nynäshamn in Sweden and Ventspils in Latvia during 2021. The new ferries will add a further 30 per cent freight capacity and offer an attractive alternative way to travel on the Baltic Sea. After receiving close to 600 name suggestions from customers online the new names are - Stena Scandica and Stena Baltica. In October Stena Line announced the strengthening of their Baltic Sea fleet  with the deployment of two modern RoPax vessels on the route between Nynäshamn in Sweden and Ventspils in Latvia during 2021, which will add 30 per cent more lane metre s   freight capacity and offer a brand new modern onboard experience. The two modern RoPax vessels were built at the Italian shipyard Visentini in 2005 and have been operating on Stena Line’s Irish Sea route between Belfast and Liverpool for the last 10 y...
Read more